Description

6.6" Display For Tecno Camon 15 CD7 LCD Display Touch Screen Digitizer Panel Assembly For Tecno CD7 LCD Repair Replacement Parts

Welcome to Top Phone Parts Store. Thanks very much for your support. 

Product description：

1. For Tecno Camon 15 CD7 lcd screen replacement parts.

2. You can replace your faulty, defective, non-responsive or damaged, scratched LCD screen.

3. All LCDs are tested one by one before shipment.

4. Quality: Original IPS

Notification：

1. Each item will be checked and in good condition before shipping. No instructions provided.

2. This is not an easy job for someone who has no technical skills with disassembling or assembling mobile phone, so make sure you know how to install before order or give it to the professionals to installed.

3. Highly recommend professional installation. You need to test it before install the LCD, we will not responsible for any damages that you may cause during the installation.

Notes before Installation：

1. Tips 1: Test before installation

    When testing, do not remove any protective film or tags. Please pay attention to the problem of static electricity.

    Before attempting any repair, be sure to ground yourself is an ESD (electro static discharge) strap. This will prevent static electricity from damaging the electronic components within the phone.

    Ensure you wear eye protection and use caution not to cut your finger with the glass splinters.

2. Tips 2: Simulates testing

    Screen replacement is very fragile product. We strongly suggest test before installation. Please simulates testing, which means mobile phone apart, (motherboard + LCD or screen) connected audio cable and new replacement, power on, test finished. If test OK, please install it. If it could not show, please contact us at the first time. And please do not force it to be installed in mobile phone. We will not be responsible if the mobile phone is damaged during installation.

3. Tips 3: Do not over-bend cable

    Please make sure LCD cable Do not over-bend. Over 90 degrees bent will cause black display.