ADT factory direct sales, excellent product performance, super good reputation, 100% full inspection, power-on test before delivery. Company brand: ADT-LINK Product model: R22SS, R22FF, R22LR, R22NS, R22NF, R22NL, R22NR (R22 series) Product name: PCI-E X4 signal docking cable Wire length: 3-100cm (support wire length customization) Speed Bandwidth: PCIe 3.0 x4, gen3 32G/bps Product function: industrial control server equipment connection, PCIe signal high-speed transmission Purchasing restrictions: It is only for professional engineers to designate the purchase. It is not suitable for general purposes and cannot be used. Ordinary buyers should not buy it. Procurement Tip: Be sure to buy 1~2 samples to test and verify that they are correct before purchasing in large quantities. Friendly reminder: This product has many compatibility problems. Improper assembly or improper operation will burn your device. Only professional engineers designate the purchase. This product is non-refundable and non-replaceable, please consider and confirm before placing an order. Length description: The length of the wire in our shop is the part of the single-finger wire, excluding PCB and connectors. If it includes PCB and connectors, add about 4cm. In this way, the total length is about 9cm, refer to the dimension of the line with a length of 5cm in the figure below.

R11 series product model description:

Product advantages: one. Wire advantage, using German patented imported wire, using Taiwan imported connector, support PCIe 3.0 full-speed stable transfer two. The cable length advantage, from 3 cm to 1 meter can be customized. The adapter cable sold by our store has low wire impedance, and the cable length within 60 cm supports PCIe3.0 full speed. three. The differential signal has no via hole design, there is no signal attenuation interference problem of parasitic capacitance and parasitic inductance, and there is no CAF micro-short circuit phenomenon, and the product is durable Four. The product is made of high-quality materials, the PCB workmanship is precise, the thickness of the copper material is thickened to 1oz, the gold-plated content of the gold finger is sufficient, and the gold-plated foot has good electrical conductivity, which can reduce the blue screen of crash caused by the increase of oxidation and rust resistance. five. The wire material selected for the product itself is very durable. The metal welding point is protected by a PCB gasket with a thickness of 3mm, and the screw and hexagonal nut are fastened. Nail drop problem. The wire can be bent or folded without affecting the use. six. PCB dwarf and fat design, dwarf will not be stuck to the graphics card, fat and long design makes the board easier to install, reducing the chance of damage. Product Image:

Purchase Notes: 1. Be sure to recognize the direction when plugging in, do not plug it backwards or in a wrong position to prevent burning the device. When plugging in, first hold the socket of the device before plugging in, to avoid breaking the pins of the socket with too much force. Bending and pulling are prohibited within 2cm of the welding between the two ends of the wire and the circuit board. 2. Various motherboards and devices have different signal driving capabilities. The test results of our store are not guaranteed to be consistent with your test results. As long as the extension cable is connected, the signal will be lost. If you require perfection, please do not buy. 3. The graphics card or motherboard is an electronic device that will age and oxidize with time, and it will only become more unstable when an extension cable is connected. Older devices are not supported. Your device older than three years is not supported. Do not buy. 4. It is limited to the purchase specified by the product engineer. It is only for product testing. For other purposes, please do not buy it.