Ewelink 4 weg schalter WiFi relais schalter 2,4G smart fernbedienung USB 5V 7V 12V 24V 32V 110V 220V 10A relais Alexa Alice
special attention
This ewelink module can only be used with our remote: 2.4G (lightweight smart remote). Does not support 433.92MHz RF remote control on the market, please do not buy other remote control! ! !
4 Channel Dry Contact Wifi Relay(Three Working Modes)
Use for
1.Remotely give a pulse signal to turn on or turn off Lights,Lamps.computer and other home appliance.2.Remotely give a pulse signal to turn on or turn off Garage Door,Door Access,Electric Motor Lock,Sliding Door.3.Remotely give a pulse signal to control DC Motor,AC Motor to Forward and Reverse.
2.4G smart remote control
Our products can only use our 2.4G remote control, if you need a remote control, it is best to contact us to confirm. Do not buy privately
Note
The relays is passive output(dry contact), No matter how many power you supply in the input, the output don't have any voltage, you also need to supply power in output.The power supply in the input just can make PCB board work.If you do not supply power in output, the connectted device can't work.
3 Working Modes
1.Self-locking mode : Each channel could be switched on/off seperately.You can turn on/turn off all channel at the same time.2.Interlocking mode : Switch on any channel , other channels will be switched off automatically .3.Inching mode : Switch on one channel,the channel will be automatically closed after 0.5seconds .Other channel is same as the channel.If you need to change the mode,you need to press the mode button or active the working mode in the app.
How to Change the Inching Time
If you need to change the inching time.you need to press the mode button to enter into self-locking mode or interlocking mode,so you can change the inching time on the APP and the inching time only available in the self-locking or interlocking mode)The time range is 01-3600 seconds.
Features:
【Two Input Ports】You could choose Micro USB 5V port or the DC/AC7-32V screw terminal port to supply power in the input to make the pcb board board work.【Dry Contact/Passive Output】 No matter the power source you supply in the input, the output don't have any voltageIf you do not supply power source in output port, the connectted home appliance can't work, you also need to supply power source in output.【Timer】The connectted home appliances can be automatically turned on/off according to the time schedule.Each channel can set different time schedule.
Different Ways to Control the WIFI Module
【APP remote control】You can control connected home appliances in Tuya or Smart Life APP anytime, anywhere. Such as electric lamps, electric kettles, rice cookers, electric curtains, etc.【2.4G remote control control】The WIFI module supports 2.4G remote control, you can control the WIFI module through the 2.4G remote control.【Mobile phone control】When you are out or at home, you can control the device in your smartphone via 2G/3G/4G mobile network or WIFI.(Note: The router needs to be connected to the Internet, the WIFI module needs to be close to the router, and the wifi module needs to be online in the Tuya Smart Life APP)【voice control 】Compatible with Alexa and Google Assistant, you can use voice control to turn on/off connected appliances.【Share Control】One device can be controlled by multiple mobile phones, you can share the wifi module with your family.【Group Control】One mobile phone can control multiple smart devices. You can add wifi modules and other smart devices to a group, then you can turn on/off all smart devices at the same time.
Description:
Input 1: Micro USB 5V portInput 2: (screw terminal port): DC/AC 7-32VNC NO COM output: passive output (dry contact)Working frequency: 50-60Hz2.4G smart remote controlWorking temperature: -20-70℃Wifi Standard/Protocol: IEEE 802.11b/g/n, WIFI 2.4GhzMaximum load: 16A/3500W/4 channelsMaximum current: `10A/2000W/channelSize: 75*73*20mm
State of Assembly : Ready-to-Go
Compatibility : All Compatible
Model Number : Jog/self-locking/interlocking relay
Camera Equipped : No
Brand Name : Scimagic-RC
Certification : CE
Origin : Mainland China
Working voltage : AC/DC7-32V AC 85-250V USB 5V
Indicator : With signal indicators, relay pull the light
Model Number : SMG-E0905
Input current : 10A
Standby current : 80mA
Operating temperature : -20 degrees to +70 degrees
Item Size : 75*73*20mm
Compatibility : All Compatible
Wattage : ≤2000W
Board consumption : <1W
Wireless Standard : 2.4GHz, 802.11 b/g/n
Mobile App : eWeLink on Android/IOS
4 Channel Total Load : 10A/2000W