GT3037 T3 Flansch 500HP Universal Turbo Ladegerät A/R: 0,82 + Öl In & Return Linie
Turbo Introduction:
The GT3037 Turbocharger is a large turbo capable of generating 500 HP, depending on application and with the correct tuning. The GT3037 is generally used for larger displacement engines of 3.0L and up, since these types of engines can produce enough exhaust volume to push the GT3037
↵Application:Perfect for all 4 / 6 cyl 2.5L-3.0L engineHorse Power: Boost Horse Power up to 500BHP
Specification:Exhaust Inlet (Turbo Manifold) Flange: Standard T3 FlangeExhaust Outlet Flange: 4-Bolt FlangeTurbine Trim: 74.2Turbine Inducer Diameter: 64.8mmTurbine Exducer Diameter: 55.8mmTurbine A/R: 0.82Compressor Trim: 48.1Compressor Inducer Diameter: 52.7mmCompressor Exducer Diameter: 76mmCompressor A/R: 0.6Bearing: Journal BearingCooling Type: Water + OilWarranty: 2 Years for any manufacture defects
Oil lines:
Features:
1. GT3037 GT3076 500 +HPS Universal 0.82 A/R. Very Good response turbo for 6 Cyl applications. This turbo has a flow capacity of about over 500HP.2. (1)cost effective turbocharger give your car 20-25% more total power (2) Turbine housing uses ductile iron QT450-10 Can withstand temperatures up to 700 degrees Celsius (3) Steel Turbine Wheel made from the special K418 alloy to achieve high oxidation resistance and stability under high temperatures up to 900 degrees Celsius(4) Cast aluminium blades with good gas tightness and corrosion resistance3. This Turbocharger you will receive has been balanced using the VSR machine technology.Only the VSR machine measures imbalance to the speeds necessary to be an effective test, If this balancing process is not carried out, the result can be a turbo which will be noisy in operation and is very likely to suffer failure prematurely
Installation Notice:
We highly recommend you make sure the points below before installing:1.Replace the air filter: if the if the air filter is not replaced may cause the compressor wheel damage. 2.Replace the engine oil: Because floating bearing and turbocharger will be damaged by impurities in the old oil. 3.After large overhaul, the engine cannot be replaced with a new turbocharger because there are too much impurities in oil after overhauling which will damage the replacement turbocharger immediately. Please run the old turbocharger for 7-10 days and then replace to new turbocharger and new engine oil.
* This is universal application turbo, so modification might be required for some vehicles* Professional installation is highly recommended (Instruction Included. (If not, we could offer you the E-book version. ))
* For any other question, please feel free to contact us by message :
OEM NO. : GT3076 ,GT3037
Model Number : GT30 GT3037 GT3076 Turbo Turbocharger
Condition : Brand New
Item Width : 27cm
Brand Name : MXR
Material : K418 alloy
Origin : Mainland China
Item Height : 28cm
Other Part Number : Perfect for all 4 / 6 cyl 2.5L-3.0L engines
Claims: : No any proprietary rights,affiliate and sponsorship with the third party marks.
Interchange Part Number : Perfect for all 4 / 6 cyl 2.5L-3.0L engines
Item Length : 26cm
Special Features : Balanced by Schenker
Material Type : Alloy steel and Alloy aluminum
Product Note: : Due to the light and different screen display,the picture and product maybe slightly different
Compressor: : Trim 56 Inducer Diameter 57 mm
Placement on Vehicle : place on vehicle
Bearing Type : Journal bearing turbo
Item Weight : 10kg
Model Number : GT3076 GT3037
Exhaust (Turbo Manifold) Flange : Standard T3 Flange
Cooling Type : Water and Oil Cooling
Country/Region of Manufacture : china
Product Type: : This is aftermarket replcement part.
Horse Power : Boost Horse Power up to 500+BHP
Fit For : Perfect for all 4 / 6 cyl 2.5L-3.0L engines