Description

 Application :

        Control Lights, TV, Motors, Fans, Cameras, Video Signals, Audio Signals, Electric Doors/Locks/Windows/Curtains/Cars or Other Appliances with voltage AC 110~240V or DC 0~28V.

Products:

 Receive plates parameter: 1, the working voltage: DC12V

2, the quiescent current:  10mA

3, Working temperature: -10  - +60

4, the receiving frequency: 315MHz/433MHz (special frequency can be customized)

5, the receiver sensitivity:-98Db (requires a higher receiver sensitivity can be equipped with additional receiver module)

6, Product size: 34 * 31 * 18mm 

7,Work: self-locking T4, jog M4, interlock L4 (1,2,3 solder achieved through the exchange of state)

 Remote control parameters:

1, the working voltage: 12V (wear 12V23A battery a)

 2, frequency: 315MHZ/433mhz 3, Transmission Distance: 1000 meters (open) 4, encoding type: fixed code needed to set a password welding code 5, Dimensions: 85mm*37mm*16mm

  6, the oscillation resistance: 4.7M 

Distance open without interference theoretical distance, the practical application of the use of environmental disturbances decrease, estimated in accordance with the label 10% -30%, Thank you for your cooperation.

Description of functions: Self-locking T4: A open, and then press the A off, the rest of the keys and so on. The jog M4: Press A to open, release the A off the rest of the keys and so on. Interlock L4: A Open A Off B, B to open. A B can only remain a key to open

 Please notice that : here is the 1CH receiver and 1 buttons transmitter /remote control .you can choose the all the working way that you can choose ,    Please tell us the working way that you want after you buy it , if you are not the professional person, we would set the working way as your requirement before we ship .if you have't tell us we will ship to by to make it at the Toggle ,you can change it when you get it .  

Learning methods and procedures:

 Press once receiving plate learn button until the indicator light flashes once, then press the remote control button, learning is completed 

Clear saved information:

  Press and hold the learn button on receiver board about 5 seconds until the indicator light goes out, the Qing code is completed.  

Package include:

    1 CH receiver * 1pcs

    1-button remote control * 1pcs