Condition: 100% Brand New Material:ABS Workvoltage:8V-30V Maximumload:Upto5.0ampoutput Workingtemperature:0℃-50℃ Storageenvironmenttemperature:-20℃-70℃ Relativehumidity:60% Voltdisplays:3-digitLED(resolution:0.1V) Protocolsdetected:PWM(11850),VPW(11850),ISO 9141-2, DIS/ISO14230-4,CANbus(1-2284)(SAE11939) PRODUCT FEATURES: 1. Probing at the OBDII connector is no longer required. 2. Easily access each of the 16 pins while scan tool communicating with vehicle. 3. LEDs to quickly indicate power or ground problems of OBDII connector. 4. Mimics the OBDII connector layout for quick reference. 5. Quick, safe and convenient access to chassis ground and power by this monitor. 6. Uses safety banana sockets that accept all types of 4mm banana plugs including those with safety sheaths. One BreakBox Cover Five Functions 1. OBD2 Male to female extension line: The Length is 1.5 Meter of the line can Connect between Diagnostic Link Connector (DLC) and scan tool. 2. ALL OBD signal breakout with 4mm Banana socket: Sixteen high-quality 4mm banana sockets breakout all OBD signal for easy to Connect a multimeter or oscilloscope for detailed signal analysis. 3. OBD Signal Detects : Sixteen Led lights detect the OBD signal . Leds at pin-out display signal detection, Flashing Leds for ECU activity,the led can Detect PWM (J1850) VPW (J1850) ISO 9141-2,DIS/ISO 14230-4 (12V car and 24V diesel)CAN bus (J-2284) (SAEJ1939) Power signal and ground signal . 4. Battery voltage monitor : 3-digit blue LED (resolution: 0.1 V) Voltmeter can Continuous numeric display of voltage, Measuring range from 8-30V.So the BOX not only can detect car signal but also can detect some of diesel signal for example the diesel of K-line L-line and CAN bus (SAEJ1939) 5.with flashlight function of OBD Connector : The OBD Male Connector with flashlight function and the button,When operating in the dark the flashlight will be very useful LED INDICATIONS: Yellow LED (Pin 2/6/7/10/14/15) Light up to show communication with scan tool and protocol identification. Green LED (Pin 4/5) Light up to show ground is good. Red LED (Pin16) Light up to show there is power. CAUTIONS I DISCLAIMERS -This tool is designed for use by automotive professionals. -This tool provides easy access to the vehicle data bus lines. -Improper use of this tool can result in damage to the vehicle data communication system and associated circuits and systems. -Do not jumper pins together without understanding the circuits. -Do not use the tool to power up a load device exceeding 1 amp. -Do not place a jumper between the power pin 16 and ground pins4, 5.When this monitor is engaged the yellow L EDs will flash when changes take place on the corresponding data line. The flashing L EDs will allow you to determine the activity on that line. The green and red LEDs corresponding to OBDII connector pin4,5 and 16 are always active. Package Include: 1PC Note: 1.Please allow 1-2cm error due to manual measurement. pls make sure you do not mind before you bid. 2.Due to the difference between different monitors, the picture may not reflect the actual color of the item. Thank you! 3.Thanks for your understanding. Have a nice day!