Neue VXDIAG VCX SE Für VW DOIP Auto Diagnose Werkzeuge Für Audi für Sitz für Skoda Unterstützung Online Offline Programmierung aktive Test
VXDIAG VCX SE For VW DOIP OBD2 Diagnosis Scanner WIFI Car Mechanical tools ECU programming tpms Auto Diagnostic Tools For Audi
Top 10 Reason to choose VCX SE for VW device:
1.VCX SE support the car year 2001-2021 for VW(99% car model support).
2.The device also support to work for Audi,for Skoda,for Seat,for Bentley.
3.Support to connect by USB Cable,Lan Cable,WIFI
4.Support DOIP function.
5.Support Remote diagnostic function,Free DoNet license.
6.Support to do online programming/engineer programming E-13.
7.Support to do full system diagnosis fuction.
8.Support to do multi special function(Airbag reset, EPB/SAS/BMS/TPMS/DPF,etc)
9.Support Action test,unlock hidden function,Auto read vin function,etc,work like as original device.
10.Support to work for another car brands.
All system diagnostic function
The Diagnostics application enables a data link to the electronic control system of the test vehicle for vehiclediagnosis. The application performs functional tests, retrieves vehicle diagnostic information such as trouble and event codes and live datafor various vehicle control systems, such as ABS, SRS, Engine, Transmission, Brake System, Emission System, Fuel system,Light system, Wiper System etc.
*EPB (Electrical Park Brake system):
Help to maintain the electronic braking system safely and effectively, deactivating and activating the brake control system, assist with brake fluid control, opening and closing brake pads and setting brakes after disc or pad replacement, etc.
*SAS(Steering Angle Sensor) :
Support to perform calibration for the Steering Angle Sensor which permanently stores the current steering wheel position as the straight-ahead position in the steering angle sensor EEPROM.
*TPMS (Tire Pressure Monitoring System):
Suppot to quickly look up the tire sensor IDs from the vehicle's ECU, as well as to perform TPMS programming and reset procedures after tire sensors are replaced.
*ABS(Antilock Brake System)
Perform various bi-directional tests to check the operating conditions of both the Anti-lock Braking System and the Supplemental Restraint System.
*ECU(Electronic Control Unit)
Reading the retrieved ECU information in detail.
*DPF Regeneration(Diesel Particulate Filter) :
Support to carry out numerous functions to the Diesel Particulate Filter system.
*BMS (Battery Maintenance System:
Re-match the control module and motoring sensor for battery detecting more accurately,clear original low battery information and prevent the related control module from detecting false information.
And Many More system…
*ECU Programming and coding function
-Program ECU and fix software controlled driving performance and emission issues.
-Program adaptive data after making repair or replacement of the vehicle part.
-Support to do online programming/coding or you can use the engineer software to do offline coding,programming.
Notice:We are not support to provide the online account and engineer software link.
*VCX SE Support J2534 protocol
--Standard OBD2 automotive diagnostic equipment, support J2534 and ISO 2290 PDU protocols
*WIFI/USB/LAN Cable Connection
--The device need to work with laptop,you can connect the device to your laptop via the WIFI/USB/LAN Cable.
*HDD/SSD windows system requirement
--The minimum requirement of laptop specification need i5,4GB.
*Support DOIP:
More comprehensive DOIP function,The diagnosis response time is faster than the transfer data time is shorter
VCX SE Support Multi special function
For various scheduled service and maintenance include Maintenance Light Reset, throttle learning, steering angle learning, brake pad reset, tire pressure reset, ABS exhaust,battery matching,gear information learning,injector coding, DPF regeneration,headlight matching, gearbox learning, suspension matching ,Sunroof initialization, A/F adjustment, electronic pump start, release transportation mode, tire modification, door and window calibration, urea reset, NOx reset,start-stop setting, language setting, seat calibration, shielding failure, etc.
*Oil Lamp,Oil Reset
This function allows you to perform reset for the engine oil life system, which calculates an optimal oil life change interval depending on the vehicle driving conditions and climate.
*Electronic Parking Brake Reset
It is important in the maintenance of electronic braking system's safety and efficiency.
*Steering Angle Calibration
Helping clear the fault steering angle sensor memories and plays an important role in the steering angle sensor calibration.
*ABS Bleeding
This function allows you to perform various bi-directional tests to check the operating conditions of Anti-lock Braking System (ABS).
*Tire Pressure Monitor System Reset
This function allows you to quickly look up the tire sensor IDs from the vehicle's ECU, as well as to perform TPMS replacement and sensor test.
*Gear Learning
The scan tool monitors certain camshaft position sensors signals to determine if all conditions are met to continue with the procedure for Engine running.
*Injector Coding
Leaking injectors and some dead injectors can be missed even when an injector is disabled. Other problems with the ignition system and mechanical components also may not show an rpm loss when aninjector is turned off
*Battery Maintenance System Reset
allows the scan tool to evaluate the battery charge state, monitor the close-circuit current, register the battery replacement, and activate the rest state of the vehicle.
*Diesel Particulate Filter (DPF) Regeneration
specially works for Diesel Particulate Filter system with DPF regeneration, DPF component replacement teach-in and DPF teach-in after replacing the engine control unit.
*Electronic Throttle Position Reset
This function enables you to make initial settings to throttle actuators and returns the ''learned'' values stored on ECU to the default state. Doing so can accurately control the actions of regulating throttle (or idle engine) to adjust the amount of air intake.
*Gearbox Matching
1. This function can complete the gearbox self-learning to improve gear shifting quality.
2. When the gearbox is disassembled or repaired (after some of the car battery is powered off), it will lead to shift delay or impact problem. In this case, this function needs to be done so that the gearbox can automatically compensate according to the driving conditions so as to achieve more comfortable and better shift quality.
*AFS (Adaptive Front-lighting System) Reset
This feature is used to initialize the adaptive headlamp system. According to the ambient light intensity, the adaptive headlamp system may decide whether to automatically turn on the headlamps, and timely adjust the headlamp lightingangle while monitoring the vehicle speed and body posture.
*Sunroof Initialization
This function can set the sunroof lock off, closed when it rains, sliding / tilting sunroof memory function, temperature threshold outside the car etc.
*Suspension Calibration
1. This function can adjust the height of the body.
2. When replacing the body height sensor in the air suspension system, or control module or when the vehicle level is incorrect, you need to perform this function to adjust the body height sensor for level calibration.
And many more function..
Packing list:
1X PCS VCX SE Device
1X PCS USB Original Cable
1X PCS LAN Cable
1X PCS Original Box
Item Length : 8inch
Hardware Version : Newest
Model Name : VXDIAG SE for VW for Audi
Item Height : 2.8inch
Origin : Mainland China
Certification : CE
External Testing Certification : ce
Software Version : New
Item Width : 4inch
Special Features : Wifi
Voltage : V
Item Weight : 0.3kg
Shipping way : Fast and Free shipping
Performance : Best and steady
Power : W
Electronic : No
Item Type : Engine Analyzer
Quality : 100% original
Stock : in stock
Material Type : Plastic
After- sale-service : Best and timely
Technical Support : life time
obd2 diagnoses feature1 : Support J2534 protocol
obd2 diagnoses feature2 : ECU programming and coding
obd2 diagnoses feature3 : Code Reader
obd2 diagnoses feature4 : all system diagnostic
All system 1 : action test
All system 2 : read/clear codes
All system 3 : brush hiding function
All system 4 : EPB brake
All system 5 : maintanance clear
All system 6 : Throttle Matching
All system 7 : Tire Pressure Reset
All system 8 : Gear Learning
All system 9 : Electronic Steering
All system 10 : ABS Exhaust
All system 11 : ECU Reset
All system 12 : Oil Lamp,Oil Reset
All system 13 : Electronic Parking Brake Reset
All system 14 : Steering Angle Calibration
All system 15 : ABS Bleeding
All system 16 : Tire Pressure Monitor System Reset
All system 17 : Injector Coding
All system 18 : Battery Maintenance System Reset
All system 19 : Diesel Particulate Filter) Regeneration
All system 20 : Electronic Throttle Position Reset
All system 21 : Gearbox Matching
All system 22 : AFS (Adaptive Front-lighting
All system 23 : Sunroof Initialization
All system 24 : Suspension Calibration
All system 25 : Erasing Codes & Reset
All system 26 : I/M Readiness Status
All system 27 : Read Live Data Stream
All system 28 : View Freeze Frame Data
All system 29 : obd2 Sensor Test
All system 30 : On-Board Monitor Test
Support car 1 : for VW Dolp
Support car 2 : for Audi
Support car 3 : for Skoda
Support car 4 : for Seat
Support car 5 : for Bentley