Dear friends welcome to our XinXin Tools sotre！

Dear friends, there are many products in our store. If you can't find it, please let me know and I will help you with what you need, thank you.

Introduction of numerical control blade (diamond) useYBC151High wear resistance of the matrix with MT-TICN, AL2O3, TIN coating combination; suitable for the finishing of steel.YBC251A good combination of MT-TICN, AL2O3, TIN coating, and a fine combination of edge security.YBC351High strength in the combination of MT-TICN, AL2O3, TIN, and, which has good toughness and plastic deformation.YBD151High wear resistance matrix and MT-TI (CN), thick AL2O3, TIN coating of an excellent combination, suitable for the finishing and semi finishing of cast iron materials.YBM151Special organization structure matrix and TiCN, thin Al2O3, tin coating combined with good impact resistance and resistance to plastic deformation capacity, and has good anti impact performance, suitable for stainless steel finishing and semi finishing machining and rough machining.YBM251Good toughness and strength of the matrix and TICN, thin AL2O3, TIN coating, suitable for stainless steel semi finishing and rough machining.YBM253CVD new grade stainless steel, widely used in the field of high efficiency and high efficiency machining. Using advanced ultra-fine grain nano coating technology, with the gradient alloy substrate with high toughness, excellent performance, in large depth of cut, feed, high speed cutting process has excellent cutting performance.YBC152Thick TICN and thick AL2O3 coating, in the same time, the impact toughness is improved, and the wear resistance is improved greatly, it is the ideal choice for the steel finishing to the semi finishing high speed cutting. Cutting speed can be improved more than 25%, in the same cutting speed, cutting tool life can be increased by more than 30%.YBC252The use of thick TICN and thick AL2O3 coating, has a very strong resistance to plastic deformation and cutting edge strength, is the general election of steel from finishing to rough machining. Under the high removal efficiency of cutting parameters, the performance of the cutting parameters is stable, and can achieve more green environmental protection of dry cutting. Cutting speed can be improved more than 25%, in the same cutting speed, cutting tool life can be increased by more than 30%.YD101Suitable for processing aluminum alloyYD201Suitable for processing aluminum alloyKINGBOX blade YBDSignificant effect1, improve the production efficiency, coating and substrate are adapted to the high-speed, high into the cast iron. (cutting speed can be improved by 30%-40%)2, reduce the cost of the economy, the service life is improved by nearly 40%-50%.YBD052CVD coating, (ultra thick AL2O3+ thick TICN) coated with hard matrix, surface smooth, fine grain. The dry high speed cutting of gray cast iron shows excellent wear resistance.YBD102CVD coating, (thick AL2O3+ thick TICN) coating and hard substrate, in the high-speed machining of ductile cast iron, which reflects the good wear resistance and impact resistance.YBD152CVD coated grades, in thick AL2O3+ thickness of TiCN coating with the hard substrate binding, good resistance to spalling resistance, suitable for cast iron in high speed turning, in medium speed can withstand slight intermittent cutting, this brand is used in cast iron milling also strong versatility.YBD252CVD coated grades, in thick AL2O3+ thickness of TiCN coating with the hard substrate combination, abrasion resistance and toughness good combination for in toughness requirements (e.g. ductile iron, cast iron low wet milling, also suitable for intermittent turning.New type of nano coatingThe special coating process, the blade surface is smooth, low friction, smooth chip removal.The nanostructured coatings are unique, combined with the matrix more closely, toughness and high hardnessYBG205 stainless steel PVD coating gradeSuitable for the workpiece is relatively small, processing surface finish requirements higher processing areas.Add abrasion resistant and high temperature rare elements of ultrafine TIAIN based nano coating, high hardness and excellent high temperature performance for cutting edge to provide effective protection, special coating processing technology, coating and substrate are firmly combined, suitable for precision turning of stainless steel materials.YBG102The combination of NC-TIAIN coating and fine grain matrix is suitable for all kinds of material finishing and high temperature alloy.YBG202The combination of NIC-TIAIN coating and the strong toughness matrix of the ultrafine particles is suitable for the processing of various materials, semi finish turning and high temperature alloy.YBG302The combination of NIC-TIAIN coating and the toughness of hard alloy matrix is suitable for cutting, cutting and processing of various kinds of materials, and the combination of safety and wear resistance is achieved.Super hard blade numberYCB011 workpiece material: cast iron processing category: FinishingPCBN grade high CBN content, with good hardness (HV3400-3800), thermal stability, thermal conductivity, and good abrasion resistance, mainly used for high speed and high precision cutting and processing of cast iron, iron base p / M materials and heat resistant alloy.YCB012 workpiece material: high hardness material processing category: FinishingThe lower CBN content, the finer grain structure of PCBN grades, with high hardness (HV3200-3500)Good thermal stability and relatively low heat conduction rate, mainly used for hardened steel (HRC45-65) high speed and high precision continuous or slightly interrupted cutting processing, recommended to minimize the use of dry cutting.YCD011 workpiece material: non-ferrous metal processing category: FinishingMedium grain structure of the PCD grades, has a very high hardness (HV7000) excellent wear resistance of thermal conductivity and is mainly used for nonferrous metals (al, Cu and its alloys) and non metal (ceramic, wood and reinforced plastics, etc.), high speed, high efficiency and high precision cutting processing is a general good PCD grades.

1、Well Selected and High Preformance Materials.

2、Perfect Machining Effect and Perfect Surface Finish.

3、High Tensile Strength and Anti Abrasion Finish.

4. Specification and Accuracy are Fully Compliance with ISO Standard.

5.Our turning tools are suitable for apply in Turning and Facing working. 6. More other Lathe Tools are produced, such as Boring tool holder, Grooving tool holder,threading tool holder.